I use a small flat screw driver to move the paste around. I use a thermal paste that is inside a tube (same as a tooth paste one) and with the edge of the screw driver's flat end I take a small amount and place it in the middle of the CPU. Then with the the same flat screw driver I move the paste around as if I would mix it on a pancake. Download Map Warcraft 3 Frozen Throne One Piece here. and ensure I don't cross the square.sort of creating a circle and have enough thickness for it to communicate. I use this screw driver only for thermal paste. Then at the end I clean it with a paper towel. Nobody ever got messy from it: neither I nor my employees - Add a comment. Some people apply a little dab in the center, and then install the heat sink.

It spreads it evenly unlike a finger, and is much cleaner. I use this method on cpus with a heat spreader, and ones with the bare die. You can also apply a dab, and use a razor blade to spread it evenly too.

The finger method tends to leave air bubbles, and doesn't spread evenly. I use Arctic Silver 5, but sometimes have to spread it with a blade as it is so thick. I hear that Arctic Cooling MX-3 is suppose to be better. I hate that AS5 can be electrically conductive. It makes me nervous that i will short something out.

What will happen if I don't put a thermal paste in my processor and heatsink? Update Cancel. Jae Alexis Lee, This is what I actually went to school for! Answered Apr 7, 2015 Author has 4.1k answers and 18.3m answer views. First, it's important to understand what thermal paste is doing for you: As smooth as the metal. Should i replace the thermal paste?! Solved I'm gonna reapply the thermal paste on gpu but should I replace the thermal pads on vrams? Should I replace the thermal paste on the GPU; solved CPU 100 celsius degrees at idle - Pictures of my cpu thermal paste state inside (is this the cause?) Please help:/ solved Should I replace. Mar 13, 2017 How to Apply Thermal Paste. Choose the proper thermal paste. Most of the basic thermal grease compounds contain. Install the heat sink with even. This might be old hat for you already, but I wanted to share my experience with changing my GPUs thermal paste. I've got a XFX Radeon R9. I had some free time today so i popped out my 2 month old Msi R9 390 and re applied the thermal paste, Temps didn't seem to change at all. 73c under heavy load,.

I hate AS5 200 hour curing time. MX-3 is claimed to not need any curing time, and not electrically conductive, So if you apply the amount that Apple did with the 2006 MacBooks, you will still have a working computer. If apple applied AS5, like they applied thermal paste in 2006, I bet the laptop would be DOA. Just my little thoughts on thermal compound. Swapping out the heatsink on my 15' MBP seemed to go fine. The instructions were clear and easy to follow.

My computer had been shutting down immediately and was unusable. I did some research and it sounded like the heatsink was the problem. After reassembling the computer, when I started it up, there was a little puff of smoke from the back left of the keyboard. No screen backlight came on. The repair solved the problem of my computer constantly shutting down, but now I can only see my screen if I shine a bright light on it. Does anyone know what could have happened?

If the thermal compound was touching some little wire or something, could it have caused a short? Quote from jonahwy: Swapping out the heatsink on my 15' MBP seemed to go fine. The instructions were clear and easy to follow.

My computer had been shutting down immediately and was unusable. I did some research and it sounded like the heatsink was the problem. After reassembling the computer, when I started it up, there was a little puff of smoke from the back left of the keyboard. No screen backlight came on. The repair solved the problem of my computer constantly shutting down, but now I can only see my screen if I shine a bright light on it.

Does anyone know what could have happened? If the thermal compound was touching some little wire or something, could it have caused a short? Did you use Arctic Silver? It's possible something shorted, but I'm leaning more toward a lose display cable. Try re-seating the cable.

I've replaced the paste on many chips over the years. In my experience, the wiping method tends to leave air pockets unless you're extremely careful and spread the compound very smoothly. It's a lot easier, and more effective imho, to use the pea or line method on ANY chip.